.png)
.png)
Structural steel is a category of steel used for making construction materials in a variety of shapes and sizes. Known for its high strength-to-weight ratio, durability, and versatility, structural steel is essential in constructing buildings, bridges, infrastructure, and industrial structures.
ALUMINIUM FORMWORK
WALL PANEL
Wall panel used at wall of structure to support and casting wall concrete.
SIZE- 2400X600 mm
SLAB PANEL
The slab panel will be used to support the concrete slab weight during pouring and casting.
SIZE- 1200X600 mm
DECK PROP HEAD [DP]
Dependent upon each structure used to joint the beam together, the pipe support will be placed under the prop head.
SIZE- 100X200 mm
SLAB CORNER
Dependent upon each structure connection between wall panel &slab panel.
SIZE- 100x125 mm / 100x150 mm
SLAB INNER CORNER
Dependent upon each structure connection between wall panel &slab panel (inner corner).
SIZE- 400x400 mm
SLAB OUTER CORNER
Dependent upon each structure connection between wall panel &slab panel (outer corner).
SIZE- 400x400 mm
BEAM BOTTOM PANEL
Dependent upon each structure soffit panel will be used to cover the bottom of the beam.
MIDDLE BEAM [MB]
Dependent upon each structure used to joint the prop heads , the middle beam support the slab panels.
SIZE- 2400X600
END BEAM [EB]
Dependent upon each structure used to joint the prop head and slab corner, the end beam supports the slab panels.
HEAVY WALLER
Dependent upon each structure used to joint panels together around the wall & column depending on the thickness.
EXTRUDED CORNER ANGLE
Dependent upon each structure Used to joint panels together around the corners.
WALL & SLAB PLATFORM
Dependent upon each structure as a substitute of a scaffolding system, these wall platform , slab platform will be fixed on the concrete, (wall vs slab ) and used as working platform for workers.
ALUMINIUM ACCESSORIES
BEAM BAR
Dependent upon each structure used to joint the prop head with the beams(middle beam & end beam).
Thickness: 4mm Dia
Type : 6061 T6
Material: Aluminum
Colour : Silver
SIZE- 2400X600
WALL BRACKET
Dependent upon each structure the walllerbracket and square pipe are used to allow the. Horizontal straightness of wall panels and a flat wall surface(especially at the bottom) after concrete casting.
Thickness: 90mm
Type: Hot rolled
Material : Mild steel
Colour : Galvanized
LONG PIN
Dependent upon each structure The long pin and wedge pin will be used to fix the joint pin soldier tie (ST) with the prop head and beams (middle beam or end beam together.
Thickness : 127mm Dia
Type: long slotted pin
Material : Mild Steel
Colour: Galvanized
SIZE- 2400X600
WALL TIE
Dependent upon each structure the flat tie is used to joint the wall panel to the opposite side’s wall panel. Depending on the wall panel’s height, the number of flat tie used will vary.
Thickness : Variable
Type : Hot Rolled
Material : Mild Steel
Colour : Silver Galvanized
PLASTIC ROLL
Dependent upon each structure made of PP material ,the pp sleeve will be installed between the wall panel and the opposite side’s wall panel. The flat tie will be inserted inside this item in order to protectthe flat tie to be casted within the concrete.
Thickness : 50 Micron
Type : Stretch film
Material: PVC
Colour : Natural(clear)
MS PROP SUPPORT
Dependent upon each structure the pipe support is used to support the weight of the slab during concrete pouring and casting.
-
.
WEDGE PIN
Dependent upon each structure the round pin and wedge pin will be used to joint the wall or slab panels together.
Thickness: 3mm Dia
Type: Slotted wedge
Material: Mild Steel
Colour: Galvanized
SIZE- 2400X600
KICKER BOLT
Dependent upon each structure this set of accessories will be used as an embedded anchor in order to fix panels on the concrete surface during its installation.
Thickness :16mm Dia
Type: Hot rolled
Material: Mild Steel
Colour : Silver
STUB PIN
-
Thickness: 16mm dia
Type: Slotted pin
Material:Mild steel
Colour: Galvanized
DIRECT PIN
-
Thickness: 16mm Dia
Type : Tierod welded Pin
Material: Mild Steel
Colour : Black
PP SHEET (6FT X 4FT)
-
Thickness: 2mm; 3mm
Type: PP corrugated
Material: Polypropylene
Colour: blue
PVC SLEEVE
-
Thickness : 50mm wide
Type : Hard pvc sleeve
Material : Rigid Plastic
Colour : Orange
PVC PIPE
-
Thickness: 20mm Dia
Type : Hard PVC
Material : Rigid Plastic
Colour : Black
PVC CONE
-
Thickness: 20mm Dia
Type : Hard PVC
Material : Rigid Plastic
Colour : Black
HOLE BARI
-
Thickness: 16mm Dia
Type: Hot rolled
Material: Mild steel
Colour: Galvanized
MS WASHER
-
Thickness: 1.5 mm Thick
Type : Washer
Material: Mild Steel
Colour: Silver
SPRING WASHER
-
Thickness: 2 mm Thick
Type : Washer
Material: Mild Steel
Colour: Silver
ROCKER BOLT
-
Thickness :16mm Dia
Type: Hot rolled
Material: Mild Steel
Colour : Silver
NUTS
-
Thickness :16mm Dia
Type: Hot rolled
Material: Mild Steel
Colour : Silver
HEXA NUTS ( 30MM)
-
Thickness :16mm Dia
Type: Hot rolled
Material: Mild Steel
Colour : Silver
TIE PULLER
-
Thickness: Standard
Type: As per design
Material : Mild Steel
Colour : Blue
PANEL PULLER
-
Thickness: Standard
Type: As per design
Material : Mild Steel
Colour : Blue
BOTTOM ADJUSTER
-
Thickness : 3mm
Type : Stability provision
Material : Mild Steel
Colour : Galvanised
